Firam ɗin Solder Printer FP2636
Hasken haske
1.T dunƙule sanda regulating rike, tabbatar da daidaita daidaito da kuma levelness na PCB tsayayyen jirgin sama, m gubar farar cimma 1mm.
2. Masu mulki na stencil ƙayyadaddun firam don layin tunani, tabbatar da daidaito tsakanin stencil da PCB.
3. Taimakawa ga mai gefe guda da kuma PCB mai gefe biyu.
4. Alamar wasiƙa ga kowane hannu mai tsarawa, mafi kyau da sauƙin aiki.
nuni
Ƙayyadaddun bayanai
| FP2636 | |
| Matsakaicin Girman PCB: | 280×380mm |
| Girman Min PCB: | 10 × 5mm |
| Girman Stencil allo: | 260×360mm |
| Gudun bugawa: | Gudanar da aiki |
| Kauri PCB: | 0-20mm |
| Tsawon Platform: | mm 190 |
| Maimaituwa: | ± 0.01mm |
| Matsakaicin kusurwa: | ± 15° |
| Yanayin Matsayi: | Waje/Ramin Magana |
|
Madaidaicin Daidaitawa: | Z-axis ± 15mm |
| X-axis ± 15mm | |
| Y-axis ± 15mm | |
| Matsayin Girman Pin: | 1mm/1.5mm/2.0mm/2.5mm/3mm |
| Girma: | 660×470×245mm |
| Cikakken nauyi: | 12Kg |
| Cikakken nauyi: | 14Kg |
Takaddun shaida
Masana'anta
Q1:Wadanne kayayyaki kuke siyarwa?
A: Kamfaninmu ya yi ciniki a cikin samfuran masu zuwa:
SMT kayan aiki
Na'urorin haɗi na SMT: Masu ciyarwa, sassa masu ciyarwa
SMT nozzles, injin tsabtace bututun ƙarfe, tace bututun ƙarfe
Q2:Yaushe zan iya samun ambaton?
A: Yawancin lokaci muna magana a cikin sa'o'i 8 bayan mun sami binciken ku.Idan kuna gaggawa don samun farashin, da fatan za a gaya mana don mu ɗauki fifikon bincikenku.
Q3:Zan iya ziyartar masana'anta?
A: Ko ta yaya, muna maraba da zuwanku, kafin ku tashi daga ƙasarku, don Allah ku sanar da mu.Za mu nuna muku hanya kuma za mu tsara lokaci don ɗaukar ku idan zai yiwu.
Aiko mana da sakon ku:
Ku rubuta sakonku anan ku aiko mana
