Firintocin allo NeoDen FP2636
Ƙayyadaddun bayanai
1.NeoDen FP2636 firintocin allo na hannuyana da T dunƙule sanda tsara rike, tabbatar da daidaita daidaito da kuma matakin PCB kafaffen jirgin sama, m gubar farar cimma 1mm.
| Sunan samfur | NeoDen FP2636 firintocin allo na hannu |
| Girma | 660×470×245(mm) |
| Tsayin dandamali | 190 (mm) |
| Matsakaicin girman PCB | 280×380 (mm) |
| Gudun bugawa | Gudanar da aiki |
| PCB kauri | 0.5 ~ 10 (mm) |
| Maimaituwa | ± 0.01mm |
| Yanayin sanyawa | Waje/Ramin Magana |
| Girman firam | 500*400mm |
| Kyakkyawar kewayon daidaitawa | Z-axis ± 15mm X-axis ± 15mm Y-axis ± 15mm |
| Cikakken nauyi | 14Kg |
Lura
1. Ba a bude, reheated solder manna ya kamata a adana a cikin firiji lokacin da ba a yi amfani da shi a cikin 24 hours, da refrigeration zafin jiki ya zama tsakanin 3 ℃ da 8 ℃, kada ku sake reheat solder manna na wannan kwalban fiye da sau biyu.Kafin amfani, dole ne a fitar da shi daga cikin firiji kuma a sanya shi a cikin zafin jiki fiye da sa'o'i 4 kafin a iya buɗe shi don amfani.
2. Kafin kowane kari da manna solder, manna solder dole ne a motsa su iri ɗaya kafin amfani, saurin motsawar hannu shine 2-3 seconds kowane juyi, a cikin wannan hanya na mintuna 2 zuwa mintuna 5 don maida shi ruwa.Hoton da ke gefen hagu shine rashin daidaituwar bugu na yau da kullun wanda ya haifar da rashin isassun solder mai motsawa.Hoton da ke hannun dama hanya ce mai sauƙi don gwada yawan ruwa (Ɗauko manna solder tare da wuƙa mai motsawa na iya faɗuwa a zahiri).
Samar da layin samar da taro na SMT guda daya
Samfura masu alaƙa
FAQ
Q1:Wadanne kayayyaki kuke siyarwa?
A: Kamfaninmu ya yi ciniki a cikin samfuran masu zuwa:
SMT kayan aiki
Na'urorin haɗi na SMT: Masu ciyarwa, sassa masu ciyarwa
SMT nozzles, injin tsabtace bututun ƙarfe, tace bututun ƙarfe
Q2:Za mu iya keɓance injin?
A: Tabbas.Dukkanin injinan mu ana iya keɓance su.
Q3: Yaya game da garanti?
A: Muna goyan bayan garanti na shekara guda.Za mu taimake ku cikin lokaci.Za a ba ku duk kayan aikin kyauta a cikin lokacin garanti.
Takaddun shaida
Masana'anta
Hangzhou NeoDen Technology Co., LTD., An kafa shi a cikin 2010, ƙwararren ƙwararren ƙwararren ƙwararren masani ne a cikin na'ura mai ɗaukar hoto da wurin SMT, tanda mai juyawa, injin bugu na stencil, layin samar da SMT da sauran samfuran SMT.Mun yi imanin cewa manyan mutane da abokan haɗin gwiwa suna sa NeoDen ya zama babban kamfani kuma ƙaddamar da mu ga Innovation, Diversity da Dorewa yana tabbatar da cewa SMT aiki da kai yana samun dama ga kowane mai sha'awar sha'awa a ko'ina.Idan kuna buƙata, da fatan za ku iya tuntuɓar mu.
Imel:info@neodentech.com
Q1:Wadanne kayayyaki kuke siyarwa?
A: Kamfaninmu ya yi ciniki a cikin samfuran masu zuwa:
SMT kayan aiki
Na'urorin haɗi na SMT: Masu ciyarwa, sassa masu ciyarwa
SMT nozzles, injin tsabtace bututun ƙarfe, tace bututun ƙarfe
Q2:Yaushe zan iya samun ambaton?
A: Yawancin lokaci muna magana a cikin sa'o'i 8 bayan mun sami binciken ku.Idan kuna gaggawa don samun farashin, da fatan za a gaya mana don mu ɗauki fifikon bincikenku.
Q3:Zan iya ziyartar masana'anta?
A: Ko ta yaya, muna maraba da zuwanku, kafin ku tashi daga ƙasarku, don Allah ku sanar da mu.Za mu nuna muku hanya kuma za mu tsara lokaci don ɗaukar ku idan zai yiwu.
