NeoDen SMD karba da sanya na'ura mai hawa PCB

NeoDen SMD karba da sanya PCB na'ura mai hawa Featured Hoton

Takaitaccen Bayani:

SMD pick and place mounter suna da fasahar canja wurin ma'auni, haɗe tare da manyan kyamarori masu motsi, na iya gama hawan alluna masu tsayi cikin sauƙi.

Aika mana imel Zazzage azaman PDF

Cikakken Bayani

FAQ

Tags samfurin

NeoDen SMD karba da sanya mai hawa PCB yin inji Bidiyo

NeoDen SMD karba da sanya na'ura mai hawa PCB

Ƙayyadaddun bayanai

Sunan samfur	NeoDen SMD karba da sanya na'ura mai hawa PCB
Salon Inji	Gantry guda 4 tare da Kawuna 4
Matsayin Matsayi	4000CPH
Girman Waje	L 680×W 870×H 460mm
Mafi dacewa PCB	290mm*1200mm
Masu ciyarwa	48pcs
Matsakaicin ƙarfin aiki	220V/160W
Range na Bangaren	Mafi qarancin Girma: 0201
	Mafi Girma: TQFP240
	Matsakaicin tsayi: 5mm

Cikakkun bayanai

Kan layi biyu dogo

NeoDen bincike mai zaman kansa da haɓaka hanyoyin dogo biyu na kan layi:

A. ci gaba da ciyar da alluna ta atomatik yayin hawan

B. saita matsayin ciyarwa a ko'ina yana rage hanyar hawa

Tsarin hangen nesa

NeoDen4 yana da madaidaicin madaidaici, tsarin hangen nesa na kyamara biyu.Fasahar Micron ne ke yin kyamarori kuma an daidaita su daidai da nozzles ta amfani da haɗin haɗin kai/ aikace-aikacen aiki guda ɗaya wanda ke loda wutar lantarki.

Hudu high madaidaicin nozzles

Ana iya shigar da kowane bututun bututun ƙarfe a kowane ɗayan wurare huɗu a cikin kai, don haka injin guda ɗaya zai iya ɗaukar duk abubuwan da suka dace ba tare da buƙatar canjin bututun ƙarfe ba.Nozzles ɗin da aka ɗora a cikin bazara suna shiga kawai tare da ja daga kai.Ana iya shigar da kowane bututun ƙarfe a kowane ɗayan wurare huɗu a kai.

Masu ciyar da tef-da-reel na lantarki

Sabbin ƙwararrun masu ba da lantarki namu suna ɗaukar sabuwar dabara - gyare-gyaren kuskuren ciyarwa, wanda ke sassauta ciyarwa da ɗauka.A halin yanzu, Neoden 4 ya haɓaka matsakaicin masu ciyarwa daga 27 zuwa 48.

Shiryawa

Samar da layin samar da taro na SMT guda daya

Samfura masu alaƙa


Mai buga Stencil FP2636	Mai ɗaukar nauyi ta atomatik J12	Maimaita tanda IN6

FAQ

Q1: Shin kai kamfani ne na kasuwanci ko masana'anta?

A: Mu ƙwararrun ƙwararrun ƙwararrun ƙwararru ne a cikin Injin SMT, Injin Pick da Place Machine, Reflow Oven, Firintocin allo, Layin Production na SMT da sauran samfuran SMT.

Q2:Menene hanyar jigilar kaya?

A: Waɗannan duka injuna ne masu nauyi;muna ba da shawarar ku yi amfani da jirgin dakon kaya.Amma abubuwan da aka gyara don gyara injinan, jigilar iska zai yi kyau.

Q3:Wadanne kayayyaki kuke siyarwa?

A: Kamfaninmu ya yi ciniki a cikin samfuran masu zuwa:

SMT kayan aiki

Na'urorin haɗi na SMT: Masu ciyarwa, sassa masu ciyarwa

SMT nozzles, injin tsabtace bututun ƙarfe, tace bututun ƙarfe

nuni

Takaddun shaida

Masana'anta

Idan kuna buƙata, da fatan za ku iya tuntuɓar mu.

Na baya: Injin layin SMT ya zaɓi wuri tare da kawuna 4

Na gaba: Zaba da sanya saman tebur na inji don yin amfani da PCB

Q1:Wadanne kayayyaki kuke siyarwa?

A: Kamfaninmu ya yi ciniki a cikin samfuran masu zuwa:

SMT kayan aiki

Na'urorin haɗi na SMT: Masu ciyarwa, sassa masu ciyarwa

SMT nozzles, injin tsabtace bututun ƙarfe, tace bututun ƙarfe

Q2:Yaushe zan iya samun ambaton?

A: Yawancin lokaci muna magana a cikin sa'o'i 8 bayan mun sami binciken ku.Idan kuna gaggawa don samun farashin, da fatan za a gaya mana don mu ɗauki fifikon bincikenku.

Q3:Zan iya ziyartar masana'anta?

A: Ko ta yaya, muna maraba da zuwanku, kafin ku tashi daga ƙasarku, don Allah ku sanar da mu.Za mu nuna muku hanya kuma za mu tsara lokaci don ɗaukar ku idan zai yiwu.