NeoDen SMT stencil tsabtace inji
NeoDen SMT stencil tsabtace inji
Bayani
Siffofin
1. M kuma barga zane.
2. Dace da tsaftacewa solder manna, ja manne stencil da wani ɓangare na PCB hukumar sundries.
3. Ana amfani da matsewar iska azaman makamashi, aminci kuma babu haɗarin wuta.
4. Tsabtace ruwa bayan tace tace wurare dabam dabam, da Gudun kudin ne low, da kuma amfani ne low ma.
5. A shirye-shiryen fesa matsa lamba daidaita aiki, da matsa lamba daidaitawa daban-daban tsaftacewa abubuwa.
6. Fesa matsa lamba, diaphragm famfo iska tushen matsa lamba za a iya saka idanu, mutum ganewa.
7. The inji bakin karfe, acid da alkali juriya, da fuselage ne sturdy da m.
8. Daya button aiki, atomatik tsaftacewa, bushewa tsari.
Ƙayyadaddun bayanai
| Sunan samfur | NeoDen SMT stencil tsabtace inji |
| Samfura | CJF130 |
| Amfanin gas | 800L/min |
| Tsabtace karfin ruwa | 30-50L |
| Samar da tushen iskar gas | 0.45-0.7Mpa |
| Gudun tsaftacewa | Tsabtace rigar: 5 minTsabtace bushewa: 5 min |
| Lokacin zagayowar | Kimanin dakika 8 |
| Tushen wuta & amfani | 100-230VAC(na musamman), 1ph, max 180VA |
| Girma | 800*1000*1700mm |
| Lokacin bushewa | 0-999s |
| Lokacin bushewa | 225kg |
Idan kuna buƙata, da fatan za ku iya tuntuɓar mu.
Samar da layin samar da taro na SMT guda daya
Samfura mai alaƙa
FAQ
Q1:Wadanne kayayyaki kuke siyarwa?
A: Kamfaninmu ya yi ciniki a cikin samfuran masu zuwa:
SMT kayan aiki
Na'urorin haɗi na SMT: Masu ciyarwa, sassa masu ciyarwa
SMT nozzles, injin tsabtace bututun ƙarfe, tace bututun ƙarfe
Q2:Menene hanyar jigilar kaya?
A: Waɗannan duka injuna ne masu nauyi;muna ba da shawarar ku yi amfani da jirgin dakon kaya.Amma abubuwan da aka gyara don gyara injinan, jigilar iska zai yi kyau.
Q3:Ta yaya zan biya?
A: Abokina, akwai hanyoyi da yawa.T/T (mun fi son wannan), Western Union, PayPal, zaɓi wanda kuka fi so.
Game da mu
nuni
Takaddun shaida
Masana'anta
Idan kuna buƙata, da fatan za ku iya tuntuɓar mu.
Q1:Wadanne kayayyaki kuke siyarwa?
A: Kamfaninmu ya yi ciniki a cikin samfuran masu zuwa:
SMT kayan aiki
Na'urorin haɗi na SMT: Masu ciyarwa, sassa masu ciyarwa
SMT nozzles, injin tsabtace bututun ƙarfe, tace bututun ƙarfe
Q2:Yaushe zan iya samun ambaton?
A: Yawancin lokaci muna magana a cikin sa'o'i 8 bayan mun sami binciken ku.Idan kuna gaggawa don samun farashin, da fatan za a gaya mana don mu ɗauki fifikon bincikenku.
Q3:Zan iya ziyartar masana'anta?
A: Ko ta yaya, muna maraba da zuwanku, kafin ku tashi daga ƙasarku, don Allah ku sanar da mu.Za mu nuna muku hanya kuma za mu tsara lokaci don ɗaukar ku idan zai yiwu.
