Yadda Ake Shigar da Daidaita Stencil akan Injin Bugawa na SMT ta atomatik?

Cikakkun injunan bugu na solder na atomatik yawanci suna amfani da stencil azaman samfuri na bugu don buga man siyar akan PCB.Ana raba wasu matakai a ƙasa kan yadda ake hawa stencil akan injin bugu mai cikakken solder na atomatik:

1. Shirya kayan aiki da kayan aiki:Tabbatar cewa kuna da kayan aiki da kayan da kuke buƙata, irin su stencil, screwdrivers, spaners, da dai sauransu Har ila yau, tsaftace tebur da stencil don tabbatar da cewa saman yana da tsabta.

2. Sanya stencil akan benci na aiki:Sanya stencil akan benci na aiki kuma a tabbata an sanya shi daidai.A al'ada, stencil ya kamata a daidaita shi tare da bel na jigilar kayan bugawa.

3. Tabbatar da stencil:Yi amfani da skru da spaners don amintar da stencil zuwa teburin.Tabbatar cewa stencil yana da ƙarfi a wurin kuma baya yin motsi ko ya ɓace.

4. Sanya stencil a cikin latsa:Sanya stencil a cikin latsawa.Wannan yawanci yana haɗawa da cire wasu sassa, kamar bel mai ɗaukar kaya da maƙasai.Sannan ana sanya stencil a matsayin da ya dace a cikin bugu.

5. Daidaita matsayin stencil:Bayan an shigar da stencil a cikin latsawa, yana buƙatar gyara don tabbatar da cewa yana cikin matsayi daidai.Ana iya amfani da na'urorin gyare-gyare don daidaita matsayi da tsawo na stencil.

6. Gwada dan jarida:Bayan an sanya stencil, ana buƙatar a gwada shi don tabbatar da cewa yana aiki daidai.Ana iya yin wannan ta amfani da manna mai siyar da ya dace da faranti na gwaji.Idan komai yana cikin tsari, to zaku iya fara bugu tare da firinta na manna mai cikakken atomatik.

Siffofin Na'urar Bugawa ta atomatik na SMT

1. Daidaitaccen tsarin sakawa na gani

Madogarar haske ta hanyoyi huɗu tana daidaitacce, ƙarfin haske yana daidaitacce, haske iri ɗaya ne, kuma siyan hoto ya fi cikakke; Kyakkyawan ganewa (gami da maki mara daidaituwa), dace da tinning, plating jan karfe, plating na zinari, fesa tin, FPC da sauran nau'ikan PCB mai launi daban-daban.

2. Tsarin squeegee na hankali

Saitunan shirye-shirye na hankali, injina kai tsaye masu zaman kansu guda biyu masu tuƙi, ingantaccen tsarin sarrafa matsi.

3. High dace da kuma high adaptability stencil tsaftacewa tsarin

Sabon tsarin gogewa yana tabbatar da cikakkiyar lamba tare da stencil;hanyoyin tsaftacewa guda uku na bushewa, rigar da vacuum, kuma za'a iya zaɓar haɗin kyauta;farantin roba mai jure lalacewa mai laushi, tsaftataccen tsaftacewa, daidaitawa mai dacewa, da tsawon gogewar takarda.

4. HTGD Special PCB kauri adaftan tsarin

Ana daidaita tsayin dandamali ta atomatik bisa ga saitin kauri na PCB, wanda yake da hankali, sauri, sauƙi kuma abin dogaro cikin tsari.

5. Buga axis servo drive

The scraper Y axis rungumi dabi'ar servo motor drive ta dunƙule drive, don inganta daidaito sa, aiki kwanciyar hankali da kuma tsawaita rayuwar sabis, don samar da abokan ciniki da kyau bugu kula dandali.