Kariyar Tsaron Injin SMT

  1. Tsaftace ƙa'idodin net ɗin yana amfani da zane don taɓa barasa don tsaftacewa, ba zai iya zuba barasa kai tsaye zuwa ragar ƙarfe da sauransu.
  2. Ana buƙatar zuwa sabon shirin don duba matsayi na bugun bugun scraper kowane lokaci.Duk ɓangarorin y-direction bugun bugun ya kamata ya wuce buɗe mafi yawan ɓangaren ɓangaren da 10MM.
  3. Duban gani kokarfe raga tsaftace injizai iya isa ragar karfe lokacin da injin ke yin tsaftacewa ta atomatik.Idan ba zai iya isa ragar karfe ba, sanar da injiniyan don magance shi cikin lokaci.
  4. Kar a danna END RUN lokacinPCB na'ura mai ɗaukar nauyikan aiki.
  5. A kula da rikewa da kuma tsayar da scraper a cikin rarrabuwa da shigarwa, in ba haka ba mai jujjuyawar zai fada a kan ragar karfe, wanda zai haifar da lalacewa ga ragar karfe da tarkace.
  6. Tabbatar ƙara sandar goyan bayan ɗaga kai.
  7. Lokacin aiki na inji ko kuma ƙarƙashin yanayin jira don shigar da injin, ba za a iya ɗaukar farantin hannu a cikin injin ba, kuma ba za a iya mika hannu cikin na'urar ba.Ba za a iya buɗe murfin aminci ba.Kada a sanya wuka mai motsawa a cikin iskar injin.
  8. Mutane biyu ba za su iya sarrafa injin a lokaci guda ba.
  9. A lokacin da ake juya na'ura mai kula da na'ura, wajibi ne a tabbatar da cewa babu wani mutum ko wani abu a cikin iyakokin na'urar.
    Lokacin buɗewa ko rufe murfin aminci na injin, dole ne a buɗe murfin aminci na injin bayan buga farantin cikin injin.
  10. Idan injin ya gaza kuma yana buƙatar kashe shi, yakamata a rufe injin kuma a sake farawa, tare da tazarar sama da daƙiƙa 30.
  11. Danna maɓallin dakatar da gaggawa don sanar da injiniyan da ke bakin aiki don magance duk wani mummunan aiki na karba da wuri inji.
  12. Tsaftace manna mai siyar da sauran abubuwa akan bel mai ɗaukar kaya da cikin injin akai-akai.

 

Layin samar da SMT


Lokacin aikawa: Dec-18-2020

Aiko mana da sakon ku: