Me yasa Manna Solder Ya Bukatar Haushi da Tashe?

SMT guntu sarrafa yana da muhimmin kayan tallafi na tallafi, shine manna mai siyarwa.

Solder manna abun da ke ciki yafi ƙunshi tin foda gami barbashi da juyi (juyi ƙunshi rosin, aiki wakili, sauran ƙarfi, thickener, da dai sauransu), solder manna shi ne kama da man goge baki, amfani da solder manna bugu inji solder manna a pcb kushin wuri, sabõda haka, injin sanyawa yana hawa m kayan aikin lantarki, sa'an nan kuma zuwa reflow soldering high zafin jiki zafi solder manna, sa'an nan gyarawa da lantarki aka gyara zuwa kushin.

Solder manna me yasa za a koma zafin jiki yana motsawa?

1. Me ya sa manna mai siyar ya buƙaci a dumama shi?

Solder manna gabaɗaya ana adana shi a cikin yanayin firiji (digiri 5-10), daga firiji za a fitar da shi daga rashin daidaituwar yanayin yanayin bitar SMT, idan an buɗe kai tsaye don amfani, ta rashin daidaituwar zafin jiki na lamba, saman manna mai siyarwar. zai manne da tururi na ruwa, idan ya sake kwarara mai yawan zafin jiki, zai iya bayyana fashe tin, wanda zai haifar da mummunan ingancin kwano.Sabili da haka, manna kayan da aka cire daga firiji yana da kyau don komawa zuwa zazzabi 2-4H.

2. Me ya sa za a motsa man siyar?

Solder manna sanya a cikin firiji, saboda daban-daban aka gyara na solder manna, sanya na dogon lokaci, daban-daban aka gyara na solder manna za su bayyana yadudduka sabon abu, don haka kana bukatar ka motsa (harfafa a cikin wannan shugabanci 20-30 jũya). na iya zama), idan ba a zuga kai tsaye tare da, to, daban-daban aka gyara na solder manna ba a hade, ba zai iya wasa da amfani da solder manna kanta.

Dalilin da ya sa ya kamata a ajiye man siyar a cikin firij maimakon kai tsaye a wurin shi ne cewa man narke yana dauke da abubuwan da za a iya cirewa da kuma rosin, wanda zai ƙafe idan an sanya shi kai tsaye a cikin yanayin da aka saba, don haka iska ta bushe.

Akwai atomatik solder manna management kabad a kasuwa, ciki har da ajiya, tempering da atomatik stirring, da dai sauransu. Idan kamfanin ne babba kuma yana amfani da mai yawa solder manna, za ka iya sayan irin wannan kayan aiki don sarrafa da kuma amfani da solder manna.

 

SiffofinNeoDen ND2 firinta ta atomatik

 

Daidaitaccen Kanfigareshan

1. Daidaitaccen Tsarin Matsayin gani

Madogarar haske ta hanya huɗu tana daidaitacce, ƙarfin haske yana daidaitacce, haske iri ɗaya ne, kuma siyan hoto ya fi kamala.

2. High dace da kuma high adaptability stencil tsaftacewa tsarin

Farantin roba mai jure lalacewa mai laushi, hanyoyin tsaftacewa na bushe, rigar da injin

sosai tsaftacewa, dace disassembly.

3. Tsarin squeegee na hankali

Saitunan shirye-shirye na hankali, injina kai tsaye masu zaman kansu guda biyu masu tuƙi, ginannun tsarin sarrafa matsi na daidai.

4. Musamman PCB kauri adaftan tsarin

Ana daidaita tsayin dandamali ta atomatik bisa ga saitin kauri na PCB, wanda yake da hankali, sauri, sauƙi kuma abin dogaro cikin tsari.

5. Solder Manna Printing Quality Inspection

Ayyukan 2D na iya gano lahanin bugu da sauri, ana iya ƙara wuraren ganowa ba bisa ka'ida ba.

6. Buga Axis Servo Drive

Inganta daidaiton darajar, samar da ingantaccen tsarin sarrafa bugu, kwanciyar hankali aiki, tsawaita rayuwar sabis.

N8+IN12


Lokacin aikawa: Maris-10-2023

Aiko mana da sakon ku: