Maimaita tanda IN6
1.Full convection, m soldering yi.
2.6 zones zane, haske da m.
3.Smart kula da high ji zafin jiki firikwensin, da zazzabi za a iya stabilized a cikin + 0.2 ℃.
4.Original high-yi aluminum gami dumama farantin maimakon dumama bututu, biyu makamashi-ceton da high-inganci, da kuma transverse zafin jiki bambanci ne kasa da 2℃.
5.Original gina-in soldering hayaki tace tsarin, m bayyanar da eco-friendly.
6.Heat rufi kariya zane, da casing zafin jiki za a iya sarrafawa a cikin 40 ℃.
7.Gidan wutar lantarki na gida, dacewa da amfani.
8.ESD tire, mai sauƙin tattara PCB bayan reflowing, dace da R&D da samfur.
9.Several aiki fayiloli za a iya adana, da yardar kaina canzawa tsakanin Celsius da Fahrenheit, m da sauki fahimta.
10.Japan NSK zafi-iska motar bearings da Swiss dumama waya, m da kuma barga.
11.Reinforced nauyi-taƙawa kartani kunshin, haske-nauyi da muhalli-friendly.
12.PCB soldering zafin jiki kwana za a iya nuna dangane da real-lokaci ma'auni
13.An amince da TUV CE, mai iko kuma abin dogara.
| Samfura | IN6 |
| Bukatun wuta: | 110/220VAC 1-lokaci |
| Ƙarfin da aka kimanta max.: | 2000 Watts |
| Yawan yankin dumama: | babba 3/kasa3 |
| Nau'in dumama: | nichrome waya da aluminum gami dumama |
| Yawan yankin sanyaya: | 1 |
| Gudun mai aikawa: | 15 - 60 cm/min (6 - 23 inch/min) |
| Matsayi Mai Girma (mm): | 30mm ku |
| Hanyar aiki: | hagu → dama |
| Kewayon sarrafa zafin jiki: | Zafin daki～300℃ |
| Daidaitaccen sarrafa zafin jiki: | ± 0.2 ℃ |
| Rarraba yawan zafin jiki na PCB: | ± 1 ℃ |
| Faɗin siyarwa: | 260 mm (10 inci) |
| Zauren tsari tsawon: | 680 mm (26.8 inci) |
| Lokacin zafi: | kusan15 min. |
| Girma: | 1020 x 507 x 350 mm (L x W x H) |
| Girman tattarawa: | 112*62*56cm |
| Cikakken nauyi: | 49 kg |
Q1:Wadanne kayayyaki kuke siyarwa?
A: Kamfaninmu ya yi ciniki a cikin samfuran masu zuwa:
SMT kayan aiki
Na'urorin haɗi na SMT: Masu ciyarwa, sassa masu ciyarwa
SMT nozzles, injin tsabtace bututun ƙarfe, tace bututun ƙarfe
Q2:Yaushe zan iya samun ambaton?
A: Yawancin lokaci muna magana a cikin sa'o'i 8 bayan mun sami binciken ku.Idan kuna gaggawa don samun farashin, da fatan za a gaya mana don mu ɗauki fifikon bincikenku.
Q3:Zan iya ziyartar masana'anta?
A: Ko ta yaya, muna maraba da zuwanku, kafin ku tashi daga ƙasarku, don Allah ku sanar da mu.Za mu nuna muku hanya kuma za mu tsara lokaci don ɗaukar ku idan zai yiwu.
