SMT pick and place machine | PCB mounter machine
NeoDen K1830 SMT karba da wurin injin tare da bidiyo na shugabannin 8
NeoDen K1830 SMT karba da wuri inji tare da shugabannin 8
Siffofin
Shugaban
8 Nozzles masu aiki tare waɗanda ke tabbatar da daidaiton jeri mai maimaitawa tare da babban gudu
Tsari
Na'ura tana aiki akan tsarin aiki na Linux mai ƙarfi da aminci
Kamara
Alamar kyamarori sau biyu don isa a matsananciyar ciyarwar ƙarshen don ingantaccen daidaitawa
Interface
Hanyoyin sadarwa na Ethernet don duk tafiye-tafiyen siginar ciki yana sa injin yayi ƙarin aiki
barga da sassauƙa
Mai ciyarwa
Za'a iya daidaita wurin zaɓin mai ciyar da pneumatic ta atomatik da sauri, don tabbatar da sauƙi
aiki da babban inganci
Calibrate
Ana iya daidaita wurin PCB ta atomatik da sauri, dangane da daidaitaccen wuri da takamaiman wuri
nema
Cikakken Bayani
1-8 Nozzles masu aiki tare waɗanda ke tabbatar da daidaiton jeri mai maimaitawa tare da babban gudu.
2-Machine yana aiki akan tsarin aiki na Linux mai ƙarfi da kwanciyar hankali.
1- Alamar kyamarori sau biyu don isa a matsananciyar feeders don ingantaccen daidaitawa.
2-High ƙuduri da babban gudun bangaren kamara tsarin inganta overall gudun na inji.
1-Rufe madaidaicin tsarin kula da Servo tare da amsawa yana sa injin yayi aiki daidai.
2-Za'a iya daidaita wurin mai ciyar da huhu ta atomatik da sauri, don tabbatar da sauƙin aiki da ingantaccen aiki.
Bayani
| Samfura | NeoDen K1830 |
| Nozzle Q'ty | 8 |
| Reel Tepe Feeder Q'ty(Max) | 66 (lantarki / mai huhu) |
| IC Tray Feeder Q'ty | 10 (A Nasara) |
| Matsakaicin girman PCB | 540*300mm(A Mataki Daya) |
| Mafi Karamin Girman Na'urar | 0201 (Akwai Feeder Lantarki) |
| Fakitin IC | QFP, SSOP, QFN, BGA |
| Daidaiton sanyawa | 0.01mm |
| Matsakaicin Tsayin Rubutun | 18mm ku |
| Matsakaicin Gudun Wuri | 16,000CPH |
| Gane bangaren | Tsarin Kyamara Mai Girma Flying Vision |
| PCB Fiducial Gane | Kyamarar Maɗaukakin Maɗaukaki |
| PCB Loading | Aiki tare da 3 Matakai na ciki Tsarin Mai jigilar kaya |
| Hanyar Canja wurin PCB | Hagu→Dama |
| Samar da Jirgin Sama | > 0.6MPa |
| Ƙarfi | 500W |
| Wutar lantarki | 220V/50HZ & 110V/60HZ |
| Cikakken nauyi | 280kg |
| Cikakken nauyi | 360kg |
| Girman Injin | 1288×1062×1291mm(Ba tare da Tri-Launi Haske ba) |
| Girman tattarawa | 1420×1220×1665mm |
Saitin ciyarwa
Zaɓi mai ciyarwa ɗaya, danna "Aiwatar", sannan za'a iya gyara bayanan da suka danganci su kamar musayar feeder, feeder, nozzle, IC tray feeder da dai sauransu.
Jerin saitin don su yakamata ya kasance: Mai ciyarwa (ko IC tray feeder) → Mahimman bayanai na Feeder→ Nozzle.
PS.: 1) Ga masu ciyarwa 1-66, mai ba da tire na IC yana cikin yanayin naƙasasshe.2) Musanya Feeder ya dogara da yanayin aikace-aikacen, idan an shigar da tef ɗin akan mai ciyar da ba daidai ba, zaku iya amfani da musayar feeder kai tsaye don warware shi.
Idan kuna buƙata, don Allah kar a yi jinkiri don aika binciken ku.
Samar da layin samar da taro na SMT guda daya
FAQ
Q1:Ta yaya zan iya siyan inji daga gare ku?
A: (1) Tuntube mu akan layi ko ta imel
(2) Tattaunawa da tabbatar da farashin ƙarshe, jigilar kaya, hanyar biyan kuɗi da sauran sharuɗɗan
(3) Aiko da daftarin perfroma kuma tabbatar da odar ku
(4) Yi biyan kuɗi bisa ga hanyar da aka sanya akan takardar proforma
(5) Muna shirya odar ku dangane da daftarin proforma bayan tabbatar da cikakken biyan ku.Kuma 100% ingancin duba kafin jigilar kaya
(6)Aika odar ku ta hanyar faɗakarwa ko ta iska ko ta ruwa.
Q2:Menene hanyar jigilar kaya?
A: Waɗannan duka injuna ne masu nauyi;muna ba da shawarar ku yi amfani da jirgin dakon kaya.Amma abubuwan da aka gyara don gyara injinan, jigilar iska zai yi kyau.
Q3:Shin yana da wuya a yi amfani da waɗannan inji?
A: A'a, ba wuya kwata-kwata. Ga abokan cinikinmu na baya, aƙalla kwanaki 2 sun isa su koyi sarrafa injinan.
Kamfaninmu
NeoDen yana ba da cikakkiyar mafita na layin taro na SMT, gami da tanda na sake fitarwa na SMT, injin siyar da igiyar ruwa, na'ura mai ɗaukar hoto da wuri, firinta mai solder, mai ɗaukar PCB, mai saukar da PCB, mai ɗaukar guntu, injin SMT AOI, injin SMT SPI, injin SMT X-Ray, SMT taro line kayan aiki, PCB samar Equipment SMT kayayyakin gyara, da dai sauransu kowane irin SMT inji za ka iya bukatar, don Allah ji free to tuntube mu.
Hangzhou NeoDen Technology Co., Ltd
Yanar Gizo:www.smtneoden.com
Imel:info@neodentech.com
Q1:Wadanne kayayyaki kuke siyarwa?
A: Kamfaninmu ya yi ciniki a cikin samfuran masu zuwa:
SMT kayan aiki
Na'urorin haɗi na SMT: Masu ciyarwa, sassa masu ciyarwa
SMT nozzles, injin tsabtace bututun ƙarfe, tace bututun ƙarfe
Q2:Yaushe zan iya samun ambaton?
A: Yawancin lokaci muna magana a cikin sa'o'i 8 bayan mun sami binciken ku.Idan kuna gaggawa don samun farashin, da fatan za a gaya mana don mu ɗauki fifikon bincikenku.
Q3:Zan iya ziyartar masana'anta?
A: Ko ta yaya, muna maraba da zuwanku, kafin ku tashi daga ƙasarku, don Allah ku sanar da mu.Za mu nuna muku hanya kuma za mu tsara lokaci don ɗaukar ku idan zai yiwu.
