Zaɓi kuma Sanya Nozzle
Zaɓi kuma Sanya Nozzle
nuni
Bayani
Akwai nau'ikan 8saman Dutsen Nozzlesa dunkule, su ne:
| Nozzle | Farashin CN030 | Farashin CN040 | Farashin CN065 | Farashin CN100 | Saukewa: CN140 | Saukewa: CN220 | Farashin CN400 | Farashin CN750 |
| Diamita na ciki | 0.6mm ku | 0.8mm ku | 1.0mm | 1.8mm | 2.0mm | 3.6mm | 5.0mm ku | 9.0mm ku |
| Diamita na waje | 0.3mm ku | 0.4mm | 0.7mm ku | 1.0mm | 1.4mm | 2.2mm | 4mm ku | 7.5mm |
| Samfura | Shawarwari (Tsarin Imperial) |
| Farashin CN030 | 0201 |
| Farashin CN040 | 0402 (mafi kyau) |
| Farashin CN065 | 0402, 0603 da dai sauransu. |
| Farashin CN100 | 0805, diode, 1206, 1210 da dai sauransu. |
| Saukewa: CN140 | 1206, 1210, 1812, 2010, SOT23, 5050, da dai sauransu. |
| Saukewa: CN220 | SOP jerin ICs, SOT89, SOT223, SOT252, da dai sauransu. |
| Farashin CN400 | ICs daga 5 zuwa 12mm |
| Farashin CN750 | ICs girma fiye da 12mm |
Masana'antar mu
Hangzhou NeoDen Technology Co., Ltd.wanda aka kafa a cikin 2010, ƙwararren ƙwararren masana'anta ne wanda ya kware a cikiSMT karba da wuri inji, reflow tanda, injin bugu na stencil, Layin samar da SMTda sauran samfuran SMT.Muna da ƙungiyar R & D da masana'antar mallaka, suna amfani da fa'idodin abubuwan da muka samu R & D, da kyau sosai daga abokan cinikin duniya.
A cikin wannan shekaru goma, mun haɓaka NeoDen4, NeoDen IN6, NeoDen K1830, NeoDen FP2636 da sauran samfuran SMT, waɗanda ke sayar da su sosai a duk faɗin duniya.Ya zuwa yanzu, mun sayar da injuna sama da 10,000pcs kuma mun fitar da su zuwa kasashe sama da 130 na duniya, wanda hakan ya sa a yi suna a kasuwa.A cikin tsarin mu na duniya, muna haɗin gwiwa tare da mafi kyawun abokin aikinmu don isar da ƙarin sabis na tallace-tallace, babban ƙwararru da ingantaccen tallafin fasaha.
FAQ
Q1:Shin kai kamfani ne na kasuwanci ko masana'anta?
A:Mu ƙwararrun ƙwararrun ƙwararrun ƙwararru ne a Injin SMT, Injin Zaɓi da Wuri, Tanda Mai Saukewa, Firintocin allo, Layin Samar da SMT da sauran samfuran SMT.
Q2:Me za mu iya yi muku?
A:Jimlar Injin SMT da Magani, Taimakon Fasaha da Sabis na ƙwararru.
Q3:Shin yana da wuya a yi amfani da waɗannan inji?
A:A'a, ba wuya kwata-kwata. Ga abokan cinikinmu na baya, aƙalla kwanaki 2 sun isa su koyi sarrafa injinan.
Q1:Wadanne kayayyaki kuke siyarwa?
A: Kamfaninmu ya yi ciniki a cikin samfuran masu zuwa:
SMT kayan aiki
Na'urorin haɗi na SMT: Masu ciyarwa, sassa masu ciyarwa
SMT nozzles, injin tsabtace bututun ƙarfe, tace bututun ƙarfe
Q2:Yaushe zan iya samun ambaton?
A: Yawancin lokaci muna magana a cikin sa'o'i 8 bayan mun sami binciken ku.Idan kuna gaggawa don samun farashin, da fatan za a gaya mana don mu ɗauki fifikon bincikenku.
Q3:Zan iya ziyartar masana'anta?
A: Ko ta yaya, muna maraba da zuwanku, kafin ku tashi daga ƙasarku, don Allah ku sanar da mu.Za mu nuna muku hanya kuma za mu tsara lokaci don ɗaukar ku idan zai yiwu.
